{"title":"Ferrum","description":"","products":[{"product_id":"ferrum-oor-headphone-amplifier","title":"Ferrum OOR Headphone Amplifier","description":"\u003ch1\u003eFerrum OOR Balanced Headphone Amplifier\u003c\/h1\u003e\n\u003ch3\u003eBy the designers of Mytek, a balanced head amp with an amazing 8 W of power to drive even the most demanding headphones. Made in Poland.\u003c\/h3\u003e\n\u003cp\u003eEasily drive even your most low impedance, high-current headphones such as Susvara, Abyss, LCD-5, and so on with this 8 W fully balanced headphone amp by Polish brand HEM, founded by the designers behind Mytek. \u003c\/p\u003e\n\u003cp\u003eUse the XLR inputs for a true balanced signal from end to end, or turn a single-ended signal into a truly balanced one via the RCA inputs. The simple front panel design offers just three knobs to control the most important settings.\u003c\/p\u003e\n\u003cp\u003eThe Ferrum sound is all about a balanced and very transparent sound signature, while ensuring there is no listening fatigue. The power amplifier section is fully discrete and was developed in-house to dial in the exact sound that was sought. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHYPSOS Power Supply\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eWhile the OOR performs beautifully right out of the box, we strongly recommend buying it in a bundle with the matching \u003ca href=\"https:\/\/upscaleaudio.pro\/products\/ferrum-hypsos-linear-switching-hybrid-power-supply\" title=\"Ferrum Hypsos hybrid linear\/switching power supply for OOR and other products\"\u003eHYPSOS\u003c\/a\u003e external power supply. This is a hybrid switching and linear supply designed to offer the \u003cspan data-mce-fragment=\"1\"\u003eadvantages of both techniques, low ripple and noise as well as fast transient response and high efficiency.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eConnected by the Ferrum Power Link cable, the HYPSOS will unleash unheard-of musicality from the combination with OOR.\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFully balanced analog headphone amplifier\u003c\/li\u003e\n\u003cli\u003eProprietary discrete power amp technology\u003c\/li\u003e\n\u003cli\u003eExternal PSU available and highly recommended \u003c\/li\u003e\n\u003cli\u003eBalanced 4-pin XLR and unbalanced RCA headphone outputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eGain(Balanced; SE):\u003c\/strong\u003e -4 dB, + 6dB, +16 dB;  -10 dB, 0 dB, 10 dB\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInputs:\u003c\/strong\u003e XLR, RCA, 2.5 mm DC connector centre positive, proprietary 4-pin DC connector\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e Balanced 4-pin XLR, 6.35 mm jack\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Power (300 \u003cspan data-mce-fragment=\"1\"\u003eΩ, 60 Ω)\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSingle Ended:\u003c\/strong\u003e 400 mW, 2 W\u003cbr\u003e\u003cstrong\u003eBalanced:\u003c\/strong\u003e 1.600 mW, 8 W \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 94 kΩ\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreamp Output Impedance (XLR, RCA):\u003c\/strong\u003e 44 Ω, 22 Ω \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeadphone Output Impedance:\u003c\/strong\u003e \u0026lt; 0.3 Ω\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (WDH):\u003c\/strong\u003e 8.6\" x 8.1\" x 2\" (21.7 x 20.6 x 5 cm)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e  3.97 lb (1.8 kg)\u003c\/p\u003e","brand":"Ferrum","offers":[{"title":"Default Title","offer_id":41387235442872,"sku":"OOR","price":2275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1564\/1247\/products\/OOR_front_2048x2048_ef940759-c364-4f00-8700-ed883f2f1495.jpg?v=1741630655"},{"product_id":"ferrum-hypsos-linear-switching-hybrid-power-supply","title":"Ferrum HYPSOS Linear\/Switching Hybrid Power Supply","description":"\u003ch1\u003eFerrum HYPSOS Linear\/Switching Hybrid Power Supply\u003c\/h1\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/A7OXrAJjU6g\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3\u003eThe transient speed of switching supplies combined with the low noise and low impedance of linear supplies\u003c\/h3\u003e\n\u003cp\u003eHYPSOS defines a brand new category of hi-fi product. It’s not a simple power supply but an audio component of its own; an equally (or even more) important part of a setup as any other. HYPSOS offers a selection of unique features and even accounts for future software improvements as the device is software controlled with as few hardware-dependent elements as possible. \u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid design.\u003c\/strong\u003e Linear\/switching hybrid design to get the advantages from both techniques, low ripple and noise as well as fast transient response and high efficiency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable.\u003c\/strong\u003e Wide continuous output voltage range of 5-30 V and up to 6 A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweet Spot Tuning (SST).\u003c\/strong\u003e Fine-tune the output voltage for the best sound. The voltage level can be safely adjusted on the fly to allow easy comparison testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4T Sensing Design (4TSD).\u003c\/strong\u003e Ensuring the exact voltage level precisely at the point of the powered device DC input terminal. The special cable design with feedback ensures flat voltage at every moment. This technique eliminates the harmful effects of the cable's resistance effectively improving transient response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced automation.\u003c\/strong\u003e Compatibility with Apple TV remote, Trigger in\/out connector; possibility to automate power-up of the devices with standby mode even without dedicated trigger connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe.\u003c\/strong\u003e Automatic Transformer Voltage Adjust (ATVA), Electronic Output Voltage Polarity Switch and overvoltage, current limit and short protection. Settings lock to prevent accidental change of the parameters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMake your current audio setup perform to its potential. Tweak the sound by modifying the voltage level on the fly and use the preferred combination of the 4-Terminal Sensing and Spread Spectrum Mode settings.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe HYPSOS ships with a 5×2.5 mm DC plug cable, and 5×2.1 mm custom cables can be made to order at additional cost.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Voltage Range:\u003c\/strong\u003e 5-30 V\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMax Continuous Output Current (\u0026lt; 13.3 V):\u003c\/strong\u003e 6 A\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMax Continuous Output Power (\u0026gt; 13.3 V):\u003c\/strong\u003e 80 W\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Impulse Current:\u003c\/strong\u003e 9 A\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Impulse Power:\u003c\/strong\u003e 270 W for 30 V\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrimary Winding Fuse:\u003c\/strong\u003e IEC 5x20mm, 250V 3.15A\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSecondary Winding Fuse:\u003c\/strong\u003e Littefuse 154004T, 4A\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (WDH):\u003c\/strong\u003e 8.6\" x 8.1\" x 2\" (217.5 x 206.5 x 50 mm)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeigth:\u003c\/strong\u003e 6.2 lb. (2.89 kg)\u003c\/p\u003e","brand":"Ferrum","offers":[{"title":"2.1mm","offer_id":50957785989304,"sku":"HYPSOS-2.1","price":1395.0,"currency_code":"USD","in_stock":true},{"title":"2.5mm","offer_id":50957786022072,"sku":"HYPSOS-2.5","price":1395.0,"currency_code":"USD","in_stock":true},{"title":"Ferrum Power Link for OOR","offer_id":42072908398776,"sku":"HYPSOS-FPL","price":1395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1564\/1247\/products\/IMG_5336-choosing-the-device-res-scaled.jpg?v=1741630653"},{"product_id":"ferrum-wandla-dac-preamplifier","title":"Ferrum WANDLA 2.0.0 DAC\/Preamplifier","description":"\u003ch1\u003eFerrum WANDLA 2.0.0 DAC\/Preamplifier\u003c\/h1\u003e\n\u003ch3\u003eA balanced sigma-delta DAC with proprietary filters, high-res touch screen, and ARC, I2S ports. Now with Ferrum Streaming Control Technology\u003c\/h3\u003e\n\u003cp\u003eFerrum brings in-depth digital know-how and its in-house analog audio and electrical technology together in this game-changing digital-to-analog convertor. The WANDLA uses an ESS Sabre ES9038PRO with Ferrum’s advanced new current-to-voltage (I\/V) converter.\u003c\/p\u003e\n\u003cp\u003eIn the 2.0.0 version, you can control track playback on a laptop connected via USB, and the DAC will also display track and album information.\u003c\/p\u003e\n\u003ch4\u003eFeatures of 2.0.0\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFSCT: convenient control of your streaming content at your fingertips for Windows, MacOS, and Volumio OS. More to be added\u003c\/li\u003e\n\u003cli\u003eVolume Synchronisation: control DAC built-in preamp volume from your computer and vice versa\u003c\/li\u003e\n\u003cli\u003eImproved user experience\u003c\/li\u003e\n\u003cli\u003eI2S compatibility: support for more devices connectable via I2S input\u003c\/li\u003e\n\u003cli\u003eFavorites input: choose frequently used inputs and select between them easier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAn optimized ARM chip offers the shortest signal path possible, making five chips redundant. It includes an MQA decoder\/renderer and digital filter selection. The whole design is focused on a balanced and very transparent sound signature, making listening fatigue something of the past.\u003c\/p\u003e\n\u003ch4\u003eDynamic Digital Filtering\u003c\/h4\u003e\n\u003cp\u003eWandla has three ESS digital filters to choose as standard and, as a world first, two digital filters created for Ferrum by renowned filter-maker Signalyst, known for its HQPlayer app. More filters will follow after interacting with Wandla users.\u003c\/p\u003e\n\u003cp\u003eThe Wandla has a range of optimized digital inputs: Specially programmed USB, and tuned coaxial and optical S\/PDIF, ARC (TV) and I2S ports. The signal path stays truly balanced using the XLR inputs and becomes truly balanced inside the DAC when using the RCA inputs.\u003c\/p\u003e\n\u003cp\u003eAmplification is proprietary, using a fully balanced modified IC pre-amplifier. A newly developed high-res touch screen accesses an intuitive UX that is a dream to operate. There is also a remote control.\u003c\/p\u003e\n\u003ch3\u003eMade for Hypsos\u003c\/h3\u003e\n\u003cp\u003eWANDLA performs beautifully right out of the box, but you can take its performance above and beyond when pairing it with the Ferrum Hypsos amp. Using the proprietary Ferrum Power Link (FPL) connection with 4TSD voltage sensing, both components will perform to their absolute maximum, unleashing unheard-of musicality.\u003c\/p\u003e\n\u003cp\u003eThe FPL has two wires delivering the power and two wires providing feedback to ensure there's flat voltage at every moment. This eliminates the harmful effects of the cable's resistance and effectively improves transient response. The current delivery speed at the powered device's input is significantly improved.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary fully balanced modified IC pre-amplifier, fine tuned for WANDLA\u003c\/li\u003e\n\u003cli\u003eSpecially programmed USB, and tuned coaxial and optical S\/PDIF, ARC and I2S ports, optimized for audio\u003c\/li\u003e\n\u003cli\u003eProprietary optimized ARM chip offers the shortest signal path possible, making 5 chips redundant.\u003c\/li\u003e\n\u003cli\u003eIncludes MQA® decoder\/renderer and digital filter selection\u003c\/li\u003e\n\u003cli\u003eProprietary Signalyst filters (two included at launch)\u003c\/li\u003e\n\u003cli\u003eProprietary 4-pin Ferrum connector for HYPSOS\u003c\/li\u003e\n\u003cli\u003eBalanced XLR and unbalanced RCA line outputs\u003c\/li\u003e\n\u003cli\u003eDigital and Analogue volume control\u003c\/li\u003e\n\u003cli\u003eEES Sabre ES9038PRO with three filter settings\u003c\/li\u003e\n\u003cli\u003eRemote control included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDAC Chip:\u003c\/strong\u003e ESS Sabre ES9038PRO\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDAC Resolution:\u003c\/strong\u003e 768 kHz\/32-bit, DSD 256 \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDigital Inputs:\u003c\/strong\u003e AES\/EBU, optical, coax SPDIF, USB, ARC, I2S\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnalog Input:\u003c\/strong\u003e Stereo RCA \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnalog Input Impedance:\u003c\/strong\u003e 47 kΩ \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e balanced XLR, unbalanced RCA \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVolume Control:\u003c\/strong\u003e Analog with bypass option \/ digital for DAC operation only\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Consumption (Idle, Max):\u003c\/strong\u003e 10 W, 15 W\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (WDH):\u003c\/strong\u003e 8.6\" x 8.1\" x 2\" (21.7 x 20.6 x 5 cm)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.97 lb. (1.8 kg)\u003c\/p\u003e","brand":"Ferrum","offers":[{"title":"Default Title","offer_id":43178865000632,"sku":"WANDLA","price":3195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1564\/1247\/files\/1-WANDLA-front-scaled.jpg?v=1741629913"},{"product_id":"ferrum-hypsos-dual-output-linear-switching-hybrid-power-supply","title":"Ferrum HYPSOS Dual-Output Linear\/Switching Hybrid Power Supply","description":"\u003ch1\u003eFerrum HYPSOS Dual-Output Linear\/Switching Hybrid Power Supply\u003c\/h1\u003e\n\u003ch3\u003eThe transient speed of switching supplies combined with the low noise and low impedance of linear supplies\u003c\/h3\u003e\n\u003cp\u003eThe Ferrum Hypsos defines a brand new category of hi-fi product. It’s not a simple power supply but an audio component of its own; an equally (or even more) important part of a setup as any other. Hypsos offers a selection of unique features and even accounts for future software improvements as the device is software controlled with as few hardware-dependent elements as possible. \u003c\/p\u003e\n\u003ch3\u003eTwo Output Design\u003c\/h3\u003e\n\u003cp\u003eSince its introduction, the Ferrum Hypsos has been put to use with all manner of audio products, and customers have been clamoring for the ability to power more than component. The dual output Hypsos delivers the same choice of 5 V to 30 V at 6 A.\u003c\/p\u003e\n\u003cp\u003eThe unique output cable design has two conductors delivering the power and two conductors providing the feedback to ensure flat voltage at every moment. This technique eliminates the harmful effects of the cable's resistance effectively improving transient response. The current delivery speed at the powered device's input is significantly improved.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid design.\u003c\/strong\u003e Linear\/switching hybrid design to get the advantages from both techniques, low ripple and noise as well as fast transient response and high efficiency\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable.\u003c\/strong\u003e Wide continuous output voltage range of 5-30 V and up to 6 A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweet Spot Tuning (SST).\u003c\/strong\u003e Fine-tune the output voltage for the best sound. The voltage level can be safely adjusted on the fly to allow easy comparison testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4T Sensing Design (4TSD).\u003c\/strong\u003e Ensuring the exact voltage level precisely at the point of the powered device DC input terminal. The special cable design with feedback ensures flat voltage at every moment. This technique eliminates the harmful effects of the cable's resistance effectively improving transient response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced automation.\u003c\/strong\u003e Compatibility with Apple TV remote, Trigger in\/out connector; possibility to automate power-up of the devices with standby mode even without dedicated trigger connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe.\u003c\/strong\u003e Automatic Transformer Voltage Adjust (ATVA), Electronic Output Voltage Polarity Switch and overvoltage, current limit and short protection. Settings lock to prevent accidental change of the parameters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMake your current audio setup perform to its potential. Tweak the sound by modifying the voltage level on the fly and use the preferred combination of the 4-Terminal Sensing and Spread Spectrum Mode settings.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Hypsos ships with a 5×2.5 mm DC plug cable, and 5×2.1 mm custom cables can be made to order at additional cost.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Voltage Range:\u003c\/strong\u003e 5-30 V\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMax Continuous Output Current (\u0026lt; 13.3 V):\u003c\/strong\u003e 6 A\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMax Continuous Output Power (\u0026gt; 13.3 V):\u003c\/strong\u003e 60 W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (WDH):\u003c\/strong\u003e 8.6\" x 8.1\" x 2\" (217.5 x 206.5 x 50 mm)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeigth:\u003c\/strong\u003e 6.72 lb (3.05 kg)\u003c\/p\u003e","brand":"Ferrum","offers":[{"title":"2.1mm \/ No Second Cable","offer_id":50957748469944,"sku":"HYP-DUAL-0.5-2.1","price":1595.0,"currency_code":"USD","in_stock":true},{"title":"2.1mm \/ 0.5 Meter 2.1mm","offer_id":50957748502712,"sku":"HYP-DUAL-0.5-2.1X2","price":1705.0,"currency_code":"USD","in_stock":true},{"title":"2.1mm \/ 0.5 Meter 2.5mm","offer_id":50957748535480,"sku":"HYP-DUAL-0.5-2.1\/2.5","price":1705.0,"currency_code":"USD","in_stock":true},{"title":"2.1mm \/ 0.5 Meter Ferrum Power Link for OOR","offer_id":50957748568248,"sku":"HYP-DUAL-0.5-2.1\/FYP","price":1705.0,"currency_code":"USD","in_stock":true},{"title":"2.5mm \/ No Second Cable","offer_id":50957748601016,"sku":"HYP-DUAL-0.5-2.5","price":1595.0,"currency_code":"USD","in_stock":true},{"title":"2.5mm \/ 0.5 Meter 2.1mm","offer_id":50957748633784,"sku":"HYP-DUAL-0.5-2.1\/2.5","price":1705.0,"currency_code":"USD","in_stock":true},{"title":"2.5mm \/ 0.5 Meter 2.5mm","offer_id":50957748666552,"sku":"HYP-DUAL-0.5-2.5X2","price":1705.0,"currency_code":"USD","in_stock":true},{"title":"2.5mm \/ 0.5 Meter Ferrum Power Link for OOR","offer_id":50957748699320,"sku":"HYP-DUAL-0.5-2.5\/FPL","price":1705.0,"currency_code":"USD","in_stock":true},{"title":"Ferrum Power Link for OOR \/ No Second Cable","offer_id":48245537472696,"sku":"HYP-DUAL-0.5-FPL","price":1595.0,"currency_code":"USD","in_stock":true},{"title":"Ferrum Power Link for OOR \/ 0.5 Meter 2.1mm","offer_id":50957748732088,"sku":"HYP-DUAL-0.5-2.1\/FYP","price":1705.0,"currency_code":"USD","in_stock":true},{"title":"Ferrum Power Link for OOR \/ 0.5 Meter 2.5mm","offer_id":50957748764856,"sku":"HYP-DUAL-0.5-2.5\/FPL","price":1705.0,"currency_code":"USD","in_stock":true},{"title":"Ferrum Power Link for OOR \/ 0.5 Meter Ferrum Power Link for OOR","offer_id":50957748797624,"sku":"HYP-DUAL-0.5-FPLX2","price":1705.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1564\/1247\/files\/Ferrum-Hypsos-Dual.jpg?v=1741629832"},{"product_id":"ferrum-wandla-2-0-goldensound-edition-dac-preamplifier","title":"Ferrum WANDLA 2.0 GoldenSound Edition DAC\/Preamplifier","description":"\u003ch1\u003eFerrum WANDLA 2.0 GoldenSound Edition DAC\/Preamplifier\u003c\/h1\u003e\n\u003ch3\u003eA balanced sigma-delta DAC with proprietary filters, high-res touch screen, and ARC, I2S ports. Now with Ferrum Streaming Control Technology\u003c\/h3\u003e\n\u003cp\u003eFerrum brings in-depth digital know-how and its in-house analog audio and electrical technology together in this game-changing digital-to-analog convertor. The WANDLA uses an ESS Sabre ES9038PRO with Ferrum’s advanced new current-to-voltage (I\/V) converter.\u003c\/p\u003e\n\u003cp\u003eIn the 2.0.0 version, you can control track playback on a laptop connected via USB, and the DAC will also display track and album information.\u003c\/p\u003e\n\u003cp\u003eThe Ferrum WANDLA GoldenSound Edition builds on the original WANDLA platform with a suite of advanced DSP tools and hardware refinements developed in collaboration with reviewer GoldenSound, giving you more control over staging, tone, and system matching while preserving the DAC’s core transparency.\u003c\/p\u003e\n\u003ch4\u003eFeatures of GoldenSound Edition\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eGoldenSound–tuned DSP modes including Spatial Enhancement, Tube Mode, and Impact+ for adjustable soundstage width, harmonic character, and perceived punch.\u003c\/li\u003e\n\u003cli\u003eRefined digital filter and increased headroom to better handle intersample peaks and modern “hot” masters without clipping or harshness.\u003c\/li\u003e\n\u003cli\u003eSelectable balanced output level (approx. 10 Vrms or 4 Vrms) via hardware switch for easier gain matching with a wider range of amplifiers.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAll enhancements implemented while retaining the original WANDLA’s DAC architecture, I\/O flexibility, and system integration options.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures of 2.0.0\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFSCT: convenient control of your streaming content at your fingertips for Windows, MacOS, and Volumio OS. More to be added\u003c\/li\u003e\n\u003cli\u003eVolume Synchronisation: control DAC built-in preamp volume from your computer and vice versa\u003c\/li\u003e\n\u003cli\u003eImproved user experience\u003c\/li\u003e\n\u003cli\u003eI2S compatibility: support for more devices connectable via I2S input\u003c\/li\u003e\n\u003cli\u003eFavorites input: choose frequently used inputs and select between them easier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAn optimized ARM chip offers the shortest signal path possible, making five chips redundant. It includes an MQA decoder\/renderer and digital filter selection. The whole design is focused on a balanced and very transparent sound signature, making listening fatigue something of the past.\u003c\/p\u003e\n\u003ch4\u003eDynamic Digital Filtering\u003c\/h4\u003e\n\u003cp\u003eWandla has three ESS digital filters to choose as standard and, as a world first, two digital filters created for Ferrum by renowned filter-maker Signalyst, known for its HQPlayer app. More filters will follow after interacting with Wandla users.\u003c\/p\u003e\n\u003cp\u003eThe Wandla has a range of optimized digital inputs: Specially programmed USB, and tuned coaxial and optical S\/PDIF, ARC (TV) and I2S ports. The signal path stays truly balanced using the XLR inputs and becomes truly balanced inside the DAC when using the RCA inputs.\u003c\/p\u003e\n\u003cp\u003eAmplification is proprietary, using a fully balanced modified IC pre-amplifier. A newly developed high-res touch screen accesses an intuitive UX that is a dream to operate. There is also a remote control.\u003c\/p\u003e\n\u003ch3\u003eMade for Hypsos\u003c\/h3\u003e\n\u003cp\u003eWANDLA performs beautifully right out of the box, but you can take its performance above and beyond when pairing it with the Ferrum Hypsos amp. Using the proprietary Ferrum Power Link (FPL) connection with 4TSD voltage sensing, both components will perform to their absolute maximum, unleashing unheard-of musicality.\u003c\/p\u003e\n\u003cp\u003eThe FPL has two wires delivering the power and two wires providing feedback to ensure there's flat voltage at every moment. This eliminates the harmful effects of the cable's resistance and effectively improves transient response. The current delivery speed at the powered device's input is significantly improved.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProprietary fully balanced modified IC pre-amplifier, fine tuned for WANDLA\u003c\/li\u003e\n\u003cli\u003eSpecially programmed USB, and tuned coaxial and optical S\/PDIF, ARC and I2S ports, optimized for audio\u003c\/li\u003e\n\u003cli\u003eProprietary optimized ARM chip offers the shortest signal path possible, making 5 chips redundant.\u003c\/li\u003e\n\u003cli\u003eIncludes MQA® decoder\/renderer and digital filter selection\u003c\/li\u003e\n\u003cli\u003eProprietary Signalyst filters (two included at launch)\u003c\/li\u003e\n\u003cli\u003eProprietary 4-pin Ferrum connector for HYPSOS\u003c\/li\u003e\n\u003cli\u003eBalanced XLR and unbalanced RCA line outputs\u003c\/li\u003e\n\u003cli\u003eDigital and Analogue volume control\u003c\/li\u003e\n\u003cli\u003eEES Sabre ES9038PRO with three filter settings\u003c\/li\u003e\n\u003cli\u003eRemote control included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDAC Chip:\u003c\/strong\u003e ESS Sabre ES9038PRO\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDAC Resolution:\u003c\/strong\u003e 768 kHz\/32-bit, DSD 256 \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDigital Inputs:\u003c\/strong\u003e AES\/EBU, optical, coax SPDIF, USB, ARC, I2S\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnalog Input:\u003c\/strong\u003e Stereo RCA \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnalog Input Impedance:\u003c\/strong\u003e 47 kΩ \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutputs:\u003c\/strong\u003e balanced XLR, unbalanced RCA \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVolume Control:\u003c\/strong\u003e Analog with bypass option \/ digital for DAC operation only\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Consumption (Idle, Max):\u003c\/strong\u003e 10 W, 15 W\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions (WDH):\u003c\/strong\u003e 8.6\" x 8.1\" x 2\" (21.7 x 20.6 x 5 cm)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.97 lb. (1.8 kg)\u003c\/p\u003e","brand":"Ferrum","offers":[{"title":"Default Title","offer_id":52280496521400,"sku":"WANDLA-GSE","price":3695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1564\/1247\/files\/WANDLAGS.jpg?v=1764377104"},{"product_id":"ferrum-broen-network-streaming-transport","title":"Ferrum BROEN Network Streaming Transport","description":"\u003ch1\u003eFerrum BROEN Network Streaming Transport\u003c\/h1\u003e\n\u003ch3\u003eA compact network transport with Volumio streaming, SERCE DDC architecture, galvanically isolated digital outputs, and Ferrum system integration\u003c\/h3\u003e\n\u003cp\u003eThe Ferrum BROEN is a network streaming transport built to keep the digital signal clean from the first network connection to the final digital output. Ferrum starts with the same kind of ground-up thinking that shaped HYPSOS, focusing on the integrity of the zeros and ones before they ever reach your DAC.\u003c\/p\u003e\n\u003cp\u003eAt the center of BROEN is Ferrum’s SERCE digital-to-digital convertor heart, designed to keep the input and output domains separated while providing FPGA-based reclocking and galvanically isolated audio outputs. It supports a wide range of digital outputs, including AES\/EBU, coaxial S\/PDIF, optical S\/PDIF, I2S over HDMI, and dedicated USB DAC outputs on Type-A and Type-C.\u003c\/p\u003e\n\u003cp\u003eBROEN is Powered by Volumio, giving it access to a broad streaming ecosystem with Spotify Connect, TIDAL Connect, Qobuz Connect, AirPlay, UPnP\/DLNA, web radio, CD playback and ripping, multi-room playback, and playback from USB storage, NAS, or an internal user-supplied M.2 NVMe SSD.\u003c\/p\u003e\n\u003cp\u003eNetwork connectivity is equally flexible. BROEN includes dual-band Wi-Fi as standard, with optional RJ45 Ethernet or optical network connection through its SFP socket. For systems where noise control matters, the SFP option allows BROEN to connect to a compatible optical network setup and reduce the noise that can arrive from the outside world.\u003c\/p\u003e\n\u003cp\u003eBROEN is also designed as part of the Ferrum ecosystem. With Ferrum Streaming Control Technology, it can integrate with WANDLA so artist and title information appear on WANDLA’s screen, with control available from WANDLA’s touchscreen or remote. BROEN can also be upgraded with HYPSOS using Ferrum Power Link for a higher-performance power-supply path.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowered by Volumio for broad streaming and playback support\u003c\/li\u003e\n\u003cli\u003eSERCE DDC output stage with FPGA-based reclocking\u003c\/li\u003e\n\u003cli\u003eGalvanically isolated audio outputs\u003c\/li\u003e\n\u003cli\u003eUltra-low jitter clocks for synchronous digital outputs\u003c\/li\u003e\n\u003cli\u003eWi-Fi standard, with optional RJ45 Ethernet or optical SFP networking\u003c\/li\u003e\n\u003cli\u003eInternal M.2 NVMe SSD slot for user-supplied music storage\u003c\/li\u003e\n\u003cli\u003eFerrum Streaming Control Technology support for WANDLA integration\u003c\/li\u003e\n\u003cli\u003eUpgradeable with HYPSOS using Ferrum Power Link\u003c\/li\u003e\n\u003cli\u003eOTA firmware updates and plugin-capable platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eProduct Type:\u003c\/b\u003e Network streaming transport\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eStreaming Platform:\u003c\/b\u003e Powered by Volumio\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eStreaming Services:\u003c\/b\u003e Spotify, Spotify Connect, TIDAL, TIDAL Connect, Qobuz, Qobuz Connect\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdditional Playback:\u003c\/b\u003e AirPlay, UPnP\/DLNA renderer, web radio, CD playback and ripping, Bluetooth A2DP, Sonos and Chromecast streaming\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSupported Formats:\u003c\/b\u003e MP3, WMA, AAC, ALAC, FLAC, APE, WAV, DSD\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eStorage Playback:\u003c\/b\u003e USB drives, internal M.2 NVMe SSD, NAS via DLNA\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eControl:\u003c\/b\u003e iOS\/Android app, web browser, basic front-panel control\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNetwork Connectivity:\u003c\/b\u003e Dual-band Wi-Fi 2.4\/5G, SFP socket for optional RJ45 ethernet or fiber optic modules\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDigital Audio Outputs:\u003c\/b\u003e Coaxial S\/PDIF, AES\/EBU, optical S\/PDIF, I2S over HDMI, USB DAC Type-A, USB DAC Type-C\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eUSB:\u003c\/b\u003e 2 x USB 3.0 Type-A and Type-C for media drives and service\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eInternal Storage Slot:\u003c\/b\u003e M.2 NVMe SSD, 80 or 110 mm, drive not included\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eVideo Output:\u003c\/b\u003e HDMI for screen display and system interface\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSystem Integration:\u003c\/b\u003e Ferrum Streaming Control Technology, trigger in\/out, OTA firmware updates\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions (WHD):\u003c\/b\u003e 8.6\" x 2\" x 8.1\" (21.7 x 5 x 20.6 cm)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight:\u003c\/b\u003e 4.19 lb. (1.9 kg)\u003c\/p\u003e","brand":"Ferrum","offers":[{"title":"Default Title","offer_id":53536666550456,"sku":"BROEN","price":2275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1564\/1247\/files\/Preliminary-image-BROEN-front.jpg?v=1782752747"}],"url":"https:\/\/upscaleaudio.pro\/collections\/ferrum.oembed","provider":"Upscale Audio","version":"1.0","type":"link"}